December 13, 2010

Why isn't trucking moving faster to electric vehicles?

Companies with large local delivery operations, like Staples, UPS and others, are moving to electric trucks, but they're doing so very slowly, despite clear savings:

"The trucks, which have a top speed of about 50 mph and can carry 16,000 pounds, cost about $30,000 more than a diesel, but Staples expects to recover that expense in 3.3 years because of the savings inherent in the electric models, Mr. Payette said.

Staples said the annual maintenance cost of a diesel delivery truck is about $2,700 in most years, including oil, transmission fluid, filters and belts. For an electric truck—which has no transmission and needs no fluids, filters or belts—the cost is about $250."

http://online.wsj.com/article/SB10001424052748704584804575644773552573304.html?mod=googlenews_wsj

On the other hand, the volumes are very small:

"FedEx is using 19 all-electric vehicles in London, Paris and Los Angeles made by Modec of Great Britain and Navistar International Corp. FedEx Chief Executive Officer Fred Smith has been outspoken about his desire to see electric vehicles proliferate, in part to cut the U.S. dependence on imported oil."

Why so slowly?


One problem: achieving economies of scale. The manufacturer received a grant to help get past that hurdle:

"Bryan Hansel, Smith's CEO, said his company is on track to lower its costs enough to not raise prices after its federal grant is used up. "We don't think there is a need for ongoing support," Mr. Hansel said. "

In comparable production volumes, electric vehicles are much cheaper than ICE vehicles, both to manufacture (without the battery) and to maintain. The cost of the battery will be more than paid for with fuel savings, leaving the other savings as profit.

Note the short-term orientation, which makes any kind of innovation difficult:

"One impediment to wider adoption of electric trucks: few finance companies offer leases on them. That's because finance companies are unsure about how to value the lease "residual," a truck's worth after a few years of use. "

The leasing companies are risk-averse. The larger problem: the operating companies are risk-averse, which is why they're leasing in the first place:

"Many large companies, including Staples, prefer to lease trucks to avoid the large capital requirements of an outright purchase, Mr. Payette said."

December 8, 2010

Can we reduce CO2 emissions from concrete?

Yes, it looks likely. We're seeing a large number of new chemistries that would allow this. The real question - how quickly we can get a very conservative building industry to test and adopt one or more of these solutions:

"Making cement for concrete involves heating pulverized limestone, clay, and sand to 1,450 °C with a fuel such as coal or natural gas. The process generates a lot of carbon dioxide: making one metric ton of commonly used Portland cement releases 650 to 920 kilograms of it. The 2.8 billion metric tons of cement produced worldwide in 2009 contributed about 5 percent of all carbon dioxide emissions. Nikolaos Vlasopoulos, chief scientist at London-based startup Novacem, is trying to eliminate those emissions with a cement that absorbs more carbon dioxide than is released during its manufacture. It locks away as much as 100 kilograms of the greenhouse gas per ton.

Vlasopoulos discovered the recipe for Novacem's cement as a grad student at Imperial College London. "I was investigating cements produced by mixing magnesium oxides with Portland cement," he says. But when he added water to the magnesium compounds without any Portland in the mix, he found he could still make a solid-setting cement that didn't rely on carbon-rich limestone. And as it hardened, atmospheric carbon dioxide reacted with the magnesium to make carbonates that strengthened the cement while trapping the gas. Novacem is now refining the formula so that the product's mechanical performance will equal that of Portland cement. That work, says ­Vlasopoulos, should be done "within a year."

Other startups are also trying to reduce cement's carbon footprint, including Calera in Los Gatos, CA, which has received about $50 million in venture investment. However, Calera's cements are currently intended to be additives to Portland cement rather than a replacement like Novacem's, says Franz-Josef Ulm, director of the Concrete Sustainability Hub at MIT. Novacem could thus have the edge in reducing emissions, but all the startups face the challenge of scaling their technology up to industrial levels. Still, Ulm says, this doesn't mean a company must displace billions of tons of Portland cement to be successful; it can begin by exploiting niche areas in specialized construction. If Novacem can produce 500,000 tons a year, ­Vlasopoulos believes, it can match the price of Portland cement.

Even getting that far will be tough. "They are introducing a very new material to a very conservative industry," says Hamlin Jennings, a professor in the Department of Civil and Environmental Engineering at Northwestern University. "There will be questions." Novacem will start trying to persuade the industry by working with Laing O'Rourke, the largest privately owned construction company in the U.K. In 2011, with $1.5 million in cash from the Royal Society and others, Novacem is scheduled to begin building a new pilot plant to make its newly formulated cement."

http://www.technologyreview.com/energy/25085/

And, another form of zero-CO2 paving:

"... instead of paving with asphalt, why not use stone — sandstone to be exact, sandstone that is manufactured in place using a biological process.

Two prominent American designers, Thomas Kosbau and Andrew Wetzler, have taken an idea from a scientific paper published in 2006 and run with it. The system they devised for paving with stone has just won top prize in a South Korean design competition. And the competition was stiff — 4034 entries from 95 countries.

The stone they use is not just any stone. Instead they refer to “a biologically treated and processed paving material that uses a common microbe to alter the properties and behaviour of loose grains of sand into stabilized sandstone.”

The team says that mixing common sand, which is one of the planet’s most abundant resources, with a solution containing the microorganism Bacillus Pasteurii results in a cementing process that turns the mix into biologically engineered, hardened sandstone. "

http://www.dcnonl.com/article/id41858